Marc Techno Engineers
Ramol, Ahmedabad, Gujarat
GST No. 24AVGPS4742J1ZA
TrustSEAL Verified
Call 0804604691839% Response Rate
SEND EMAIL
Product Details:
| Brand | COLTON |
| Model | IMIG-400 DP |
| Welding Current Range | 40-400A |
| Power Consumption | 14 kVA |
| Phase | 3 Phase |
| Working Voltage | 415V |
| Welding Current at 100% Duty Cycle | 310A |
| Insulation Class | H |
| Cooling | Forced Air |
| Power Factor | 0.99 |
| Protection Class | IP 23 |
| Weight | 40 kg |
| Dimension (L x B x H) | 520 x 320 x 510 mm |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds
Product Details:
| Brand | COLTON |
| Model | IMIG-500 DP |
| Welding Current Range | 50-500A |
| Power Consumption | 20 kVA |
| Phase | 3 Phase |
| Working Voltage | 415V |
| Welding Current at 100% Duty Cycle | 400A |
| Insulation Class | H |
| Cooling | Forced Air |
| Power Factor | 0.99 |
| Protection Class | IP 23 |
| Weight | 50 kg |
| Dimension (L x B x H) | 550 x 320 x 510 mm |
| Product Type | New |
The MIG welding process is semi-automated. This is also called as Gas Metal Arc Welding (GMAW). The process of MIG welding was developed in 1940. As this is a semi-automated process so there is a constant supply of filler wire in the form of MIG wire. This wire is being supplied by wire feeder which has a motorized function. The wire passed through the liner which also has a gas feeding through the same cable to the point where an arc is formed. The MIG welding is used in fabrication where higher production is required. The process needs electricity to produce heat, electrode or filler wire for the joint and inert gas to protect the welding joint from the air in the form of an inert gas of Co2. We ask you to buy MIG welder and if a robot is used in this welding process this welding becomes automatic. This MIG welding process is fast, cost effective and produces more welding units in a small period of time so it is a more effective method of welding.
The types of wire used are Carbon steel, stainless steel, and Aluminium. The wire feeder needs special change for the Aluminium wire filler. The carbon steel is best suited for the MIG welding. The welding by MIG are as welding is clean without smoke, very cheap, fast, time-saving in changing of the electrode is minimum so time efficient. It is good for spot and tack welds
Additional Information: